Filter
Top Products
TX120 Operating Manual 47
Starting up and operation Controls and displays
CD/DVD indicator
Lights up green when the storage medium is being accessed.
Indicators on the HDD module
See items 1 and 2 in figure 9 on page 44.
1 HDD FAULT (red)
(in conjunction with a RAID controller)
– Does not light: no HDD error
– Lit: HDD Faulty or Rebuild Stopped (drive defective/needs replacing, a
rebuild process was stopped or the HDD module is not correctly
inserted)
– Slow flashing: HDD Rebuild (the data is being restored after changing
a hard disk drive)
– Fast flashing: HDD Identify
– Four fast blinks/pause: HDD Predicted Fault
– Two fast flashes/pause: HDD Hot Spare (Hot spare drive active. The
corresponding drive has failed).
2 HDD BUSY (green)
– Lights: HDD in active phase
– Does not light: HDD inactive (drive inactive)