Filter
Top Products
Security functions
Password protection for the hard disk
Passwordprotection:
The h a d disk password prevents unauthorised access to the hard disk drives
and is checked intern ally each t ime the system is boote d. The condition for this
is that you have assigned at least the supervisor password.
Activating hard disk protection
► Call up the BIOS Setup and select the Security menu .
If you have not assigned BIOS passwords yet, define the supervisor and the user
password now, if desired (see "
Securit y functions", Page 54).
► Mark the Hard Disk Security field and press the Enter key.
► In the Drive0 area ma rk the Set Master Password field and press the Enter key.
Enter new Password then appears a nd you are asked to enter a password.
► Enter the password and press the Enter key.
Confirm new Password requires you to confirm the password.
► Enter the password again and press the Enter key.
Setup Notice: Changes have been saved is displayed to confirm that the
new password has been saved.
► To assign the password for the second hard disk (Drive1), go to the Drive1 area and
select the field Set Master Password, then proceed in exactly the same way as f or
setting up the password for the first hard disk (Drive0 ).
The field Password Entry on Boot is set to Enab led by default. You can exit the BIOS
Setup once you have finished changing the settings.
► From the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key a nd select Yes.
The Table PC reboots and your hard disk is now protected w ith a password. The
password prompt is enabled as soon as the Tablet PC has rebooted.
Deactivating hard disk protection
To cancel a password without setting a new one, proceed as follows:
► Call up the BIOS Setup and select the Security menu .
► Mark the Hard Disk Security field and press the Enter key.
► In the Drive0 area ma rk the Set Master Password field and press the Enter key.
You will be initially requested to en ter the old password by the Enter current Password promp t.
You will then be requested to enter a new password by the Enter new Password prompt.
► After entering the password, press the Enter key three times.
► From the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key a nd select Yes.
The Tablet PC reboots and there is no longer any password protection for this hard disk.
► To cancel the password for the second hard disk (Drive1), go to the Drive1 area
and select the field Set Master Password, then proceed in exactly the same way as
for cancelling the password for the first hard disk (Drive0).
58 Fujitsu Technology Solutions