Filter
Top Products
Troubleshooting and tips
The cursor does not correctly follow the
pen movements
Cause
Fault elimination
Pen incorrectly calibrated
► Calibrate the pen as shown under Hardware
and Sound / Tablet PC Settings in the Control
Panel, see "
Setting the pen", Page 34 and
"
Calibrat ing the pen", Page 34.
Pen input not working
Cause
Troubleshooting
Incorrect driver installed.
► If your device is one which can only be
operated using the pen, install the driver for
the standard model.
or
► If your device is one which c an be
operated using the pen and by finger,
install the driver for the "Dual Digitizer"
model.
The Tablet PC do
es not s tart after switch on
TheTabletPC
Cause Troubleshooti
ng
The battery is
not installed correctly.
► Check whether the battery is installed
correctly in its compartment.
► Switch on the Tablet PC.
The battery is dead.
► Charg e the battery.
or
► Insert a charged battery.
or
► Connect the mains adapter to the Tablet
PC.
The power adapter is not connected corre ctly.
► Check whether the mains adapter is
connected correctly to the Tablet PC.
► Switch on the Tablet PC.
Fujitsu Technology Solutions 71