Working with the Table t PC
SIM card
A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or
Tablet PC and, together with an integrated UMTS module, enables access to a mobile radio network.
When handling SIM cards, follow the instructions supplied by the provider.
Inserting the SIM card
► Remove the battery, see Chapter "Removing the battery", Page 41.
1
► Slide the SIM card into the slot (1) until
it engages, as shown in the battery
compartment. The notch shows to the
left, the chip to the bottom.
► Install the battery again, see Chapter "
Installing battery", Page 42.
Removing a SIM card
► Remove the battery, see Chapter "Removing the battery", Page 41.
1
► Press on the edge of the SIM card so that
it jumps up slightly ou t of the slot.
► Pull the SIM card out of the slot in the
direction of the arrow (1).
► Install the battery again, see Chapter "
Installing battery", Page 42.
Wirel
essLAN/Bluetooth/UMTS
The installation of radio components not approved by Fujitsu Technology Solutions
will invalidate the certifications issued for this device.
46 Fujitsu Technology Solutions
