Security functions
Setting supervisor and user password
► Start the BIOS Setup Utility and go to the Security menu.
► Select the Set Supervisor Password field and press the Enter key.
With Enter new Password: you are a sked to enter a password.
► Enter the password and press the Enter key.
Confirm new Password requires you to confirm the password.
► Enter the password again and press the Enter key.
Changes have been saved is a con firmation that the new password has been saved.
► To set the user password, select Set U ser Password and proceed exactly as
when configuring the sup ervisor password.
If you do not want to chang e any other settings, you can exit BIOS Setup Utility.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.
PasswordSupervisorpasswor
d
Userpassword
The Ta b let PC is rebooted and the new passw ord is effective. It will now be necessary to
first enter your supervisor or user password in order to open the BIOS S etu p Utility. Please
note that the user password only provides access to a few of the BIOS settings.
Changing the supervisor or user password
You can only change the s upervisor password when you have logged into the
BIOS Setup U tility with the supervisor password.
PasswordSupervisorpasswordUserpassword
► Call the B IOS Setup Utility and g o to the Security menu.
► When changing the password, proceed exactly as for password assignment.
Removing passwords
To remove a password (without setting a new password) perform the following steps:
PasswordSupervisor
password
Userpasswo
rd
► Start the BIOS Setup Utility and go to the Security menu.
► Highlight the Set Supervisor Password or Set User Password field and press the Enter key.
You will be requested to enter the current password by the Enter Current Password prompt.
You will be requested to enter a new password by the E nte r New Password prompt.
► Press the Enter key twice.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.
The Tablet PC is rebooted and the password is cancelled.
Removing the supervisor password simultaneously deactivates the user password.
Passw
ord protection for booting of the operating system
With the supervisor password you have set in the BIOS Setup Utility (see
section "
Setting s upervisor and user password", Page 55), you can also
prevent booting of the operating system.
Operatingsystem
Fujitsu Technology Solutions 55
