Filter
Top Products
For Safe Use of the XG700 5
Never attempt to dismantle or modify the XG700 yourself. This is extremely dangerous since
the XG700 includes both high voltage and high temperature components.
If maintenance is required, contact the vendor's service department.
The following warning label may be found on the rear of XG700. Do not attempt to remove
this warning label. If you cannot read the details written in the warning label because of dirt or
wear, contact the vendor's service department for a replacement label.
• The expected life of the XG700 is approximately five years, assuming use at an ambient
temperature of 25°C.
• Use of this hardware guide, the XG700, its firmware, and the management software are
the responsibility of the user.
• Fujitsu and its partners accept no responsibility for any errors or data loss arising from use
of the XG700. Before using the XG700, it should be understood that the XG700 is not
guaranteed against failure for any more than the original purchase price.
• Fujitsu and its partners do not approve of any use of the firmware provided with the
XG700, or of any authorized firmware upgrades, for any purpose other than installation
on the XG700. Modification and disassemble are not permitted at all.
A default login password is set before the XG700 is shipped. For security reasons, a new
password should be chosen before the XG700 is used.
No self maintenance
Warning label
Safety precautions
For security