Filter
Top Products
- 9 -
２.３.６ Selection of reception mode
The reception mode refers IOC, speed, and normal/reverse printing and modes.
The former two (IOC and speed) are automatically selected by receiving the APSS
signal and phase signal. For the latter two modes, desired ones should be selected
manually.
(1) Speed and IOC
When incorrect speed or IOC is selected in
manual recording or when auto-recording
has started at improper position, its setting
can be changed with following procedure.
a) Change of speed
Press key, then the display on the
right appears. Press key to select
correct speed.
b) Change of IOC
Press key, then the display on the
right appears. Press key to select
correct IOC.
(2) Reverse mode
When recorded picture is reversed (white/black), follow the procedure below.
Press key, then the display on the
right appears. Press key to select
mode.
(3) Time display
A built-in clock is provided. The present time is displayed by pressing key
in the standard operation mode.
When the displayed time is not correct, be sure to
reset the time by following the instructions in 1.4.5.
Right display indicates April 10, Tuesday, 12:00.
２.３.７ Timer release and release of keylock in the timer mode
When the timer is in operation (except sleep timer), function of each key (except
key) is locked to keep set values and hence, ordinary keying is inhibited.
SPEED:120
1-120 2-90 3-60
IOC:576
1-576 2-288
N
0～9
SPD
IOC
N
0～9
N
0～9
REVERSE: OFF
1-OFF 2-ON
C000 JMH 3622.5
APR 10 MON 12:00
REV
・
DIM
5