Filter
Top Products
- 20 -
４．２ Wiring
4.2.1 DC power supply built-in type
Connect black wire to “-“ (negative), and red wire to “+” (positive).
4.2.2 AC power supply built-in type
Operation voltage (100/115/200/230 VAC) is pre-set at factory in accordance with
customer’s request.
In case of changing operation voltage, re-adjust the voltage changer inside the AC
power supply unit as follows.
Voltage setting:
Referring to drawing in the right, change
the short harness (ribbon wire) in
accordance with required voltage.
For example, connect the short
Harness Between CN4 and CN5 in case
of 100 VAC.
7A fuse
+ : Red
- : Black
Fig. 4.2.1 DC power cable
2A fuse
HOT : Gray
COLD : Gray
Fig. 4.2.2 AC power cable
Fig. 4.2.3 AC power supply unit