Filter
Top Products
- 13 -
the following operations.
1 : Release
2 : Setting
(1) Release
Select “1” in the above message, and fix with
key. (display on the right)
Note: When the system is in the sleep mode,
press & keys to shift
the mode to the standard operation
mode.
(2) Setting
Select “2” in the above message, and enter
desired time to sleep by key (max.
23:59), and fix it with key. To
correct or change the entered time before
pressing key, press the key
for resetting.
２.４.４ Registration of new frequency
Registration of a new frequency (450~724) or re-writing of an existent frequency
(CH000~443) can be made in the following procedure.
Press the key, and the frequency
registration mode is set. Then, message
shown on the right appears. Enter a channel
number with three keys.
Right example is for channel 000. To change
the entered number, use the key. Then,
enter a call sign with the &
the key, and fix it with
the key.
To correct call sign, press key and
re-enter a call sign before pressing key.
The message on the right shows when AAA (3 figures) is entered.
Then, enter a frequency (3~6 figures) with keys and key with a unit
of 0.1kHz Available frequency for setting are within 80.0～159.9kHz or 2000.0～
24999.9kHz. Press key to fix the registration. To correct the entry
halfway, use key for resetting. Further, the speed, IOC, reverse and
decoder can besetin sequence.
N
0～9
SLEEP MODE : OFF
1-OFF 2-ON
SLEEP MODE : OFF ?
PUSH E KEY
SLEEP TIME :
SET SLEEP TIME
CHANNEL PROGRAM
SET CH in 3 FIGS
N
0～9
△
▽
C000 SET CALL S－
IGN by KEY
E
C000 AAA 0.0
SET FREQUENCY
N
0～9
REV
・
E
E
E
C
5
C
C
C
E
E
PRG
E