Filter
Top Products
Magnum 6K25 Managed Fiber Switch Installation and User Guide (04/06)
30
www GarrettCom com
..
3.5.2 Installing 6KPM Cards in the Magnum 6K25
Up to four front-mounted 6KPM cards may be installed in one Magnum 6K25
Managed Fiber Switch unit. Follow these steps to install a 6KPM.
Step 1. Remove top chassis cover. See procedure in Section 3.5.1 above.
Step 2. Placed Granddaughter board (as shown in fig. 3.5.2a and 3.5.2b) on the chassis
built in stand off (female) provided at the front of the 6K25 Main Board and
screw down tightly with the three 5/16 stand-off (male) on the top of the
Granddaughter board The 5/16 stand off has been used to place the daughter
board on the top of the granddaughter board and latch it securely.
Fig 3.5.2a Granddaughter Board
shown separately
Fig 3.5.2b Granddaughter Board placed in slot
A and secured with three 7/16 stand-off’s
Step 3. The figure here illustrates the basic layout of an individual PM card. Each
6KPM card fits into the space provided on the main board.