Filter
Top Products
Magnum 6K25 Managed Fiber Switch Installation and User Guide (04/06)
32
www GarrettCom com
..
Step 5. Once the latching
connectors are aligned
properly and the mounting
holes are aligned with
stand offs then press
slowly and firmly with two
fingers (as shown below in
Fig. 3.5.2f) on the top of
the latching connectors
until the connectors
latched up securely.
Figure 3.5.2f: Securely latching up 6KPM Cards into a Magnum 6K25
NOTE: All 6KPM slots need not be filled in order for the Magnum 6k25 unit to be
operational. When leaving 6KPM slots empty, always use a face plate (Magnum 6K8-
BLNK) to cover the slot opening in the front panel. This will maintain proper cooling
air flow, safety, and operation as required by FCC, CE, and other regulations.
Step 6. Now screw down the
daughter board with 6
#440 screws, so that it
holds the daughter board
securely. The figure
below shows the top view
of 6KPM card after
successfully installing the
6KPM cards inside the
Magnum 6K25.
Fig. 3.5.2g Top View : 6KPM Module installed inside a 6K25
Step 7. Once the installation of granddaughter and daughter modules is done, the front
panel screen plates need to be placed on the front of the chassis cover to
complete the installation process for that port module. The front panel screen
plate comes along with the package of port module separately along with