Filter
Top Products
22 Gateway ALR 8300 User’s Guide
Cleaning the system
Your system and its components need to be cleaned occasionally. Some
programs that help maintain the integrity of the hard drives in the system
come as part of the Windows 95 and Windows NT operating systems. The
following sections contain information about cleaning the various external
parts of the system.
Cleaning the mouse
If the mouse pointer on the screen moves erratically when you move the
mouse, dirt is probably on the rollers inside the mouse.
1.
Shut down the system.
2.
Turn the mouse upside down and remove the mouse ball cover.
3.
Cup your hand under the mouse, then turn the mouse right-side up.
The gray mouse-ball should drop into your hand. If it doesn’t, gently
shake the mouse until the ball drops out of the socket.
4.
Once the mouse ball is free, use adhesive tape to pick up any dust or
lint on its surface and wipe away dirt or lint inside the mouse-ball
socket. You can also blow into the socket to remove dirt and lint. If
foreign matter is trapped inside the socket or on the rollers, use a
cotton swab dipped in isopropyl alcohol to loosen it. Allow surfaces to
dry completely after cleaning.
5.
Return the mouse ball to the socket and replace the cover, then restart
the system.
Cleaning the keyboard
Occasionally you should clean the keyboard to free it of dust and lint
particles trapped under the keys. The easiest way to do this is to blow
trapped dirt from under the keys using an aerosol can of air with a narrow,
straw-like extension.
To Clean the Mouse
4080TL.book Page 22 Tuesday, December 22, 1998 2:50 PM