Filter
Top Products
Installing the cabinet mounting brackets and mounting rails 9
Installing the cabinet mounting rails onto
generic brackets
To install the cabinet mounting rails onto generic brackets:
1 Align the back end of the cabinet mounting rail to the back mounting
bracket by sliding the inner rail forward (if the spring latch locks the inner
rail into place, free the rail by releasing the spring latch).
2 Attach the back end of the cabinet mounting rail to the back mounting
bracket using two screws, hex nuts, and washers from the accessory kit.
One screw must be located in the last back bracket screw hole. The second
screw can be located in any of the other back bracket long screw holes.
Inner slide
Spring latch
Back mounting
bracket
Inner rail
Hex nut
Washer
8506285.book Page 9 Friday, July 7, 2000 2:46 PM