Filter
Top Products
Installing the cable retractor 15
Installing a cable retractor in a non-Gateway
cabinet
To install a cable retractor in a non-Gateway cabinet:
1 Remove the adapter bracket from the cable retractor straight bracket.
2 Position the cable retractor straight bracket on the back vertical mounting
rail, then align the mounting holes on the cable retractor bracket with
the holes on the back vertical mounting rail.
3 Attach the bracket to the back vertical mounting rail using a bar nut and
screws from the accessory kit.
Straight bracket
Adapter bracket
Cable retractor
Back vertical
mounting rail
Straight bracket
Bar nut
8506285.book Page 15 Friday, July 7, 2000 2:46 PM