Gateway 8450R Server User Manual


 
22 Installation
To turn on the system drawer using normal start sequences:
1 Turn on devices and drawers attached to the system drawer first.
2 When the devices and drawers attached to the system drawer(s) are
running, turn on the system drawer.
Turning off the system drawer
To turn off the system drawer:
1 Close all programs.
2 If necessary, issue a flush command to write the contents of any caches
or buffers to disk.
3 If necessary, issue a command to exit or quit the operating system.
4 Press the ON/OFF button on the system drawer.
5 Turn off any other devices connected to the system drawer.
Securing the system drawer in the
cabinet
To secure the system drawer:
1 Close the back door of the system cabinet, then lock it if necessary.
2 Push the system drawer all the way back into the cabinet until the front
panel presses against the front vertical mounting rails.
3 Secure the system drawer to the front vertical mounting rails using four
screws from the accessory kit.
4 Close the front cabinet door, then lock it if necessary.
8506285.book Page 22 Friday, July 7, 2000 2:46 PM