Filter
Top Products
2 Installation
Installing the bezel and handles
The system ships with the bezel and handles separate from the chassis. The
bezel covers the front panel drives and controls. The handles let you pull the
system drawer out of the cabinet once it is installed.
To install the handles and the bezel:
1 Attach each handle to the sides of the chassis with two screws provided
with the handles.
Important The handles are not interchangable. The oval slots that
secure the system drawer to the cabinet are on the outside
edges of the handles and should be placed at the top of
the system drawer.
8506285.book Page 2 Friday, July 7, 2000 2:46 PM