44
www.gateway.com
5 While holding the retention cover open, remove the expansion card. You can slightly
seesaw the card end-to-end to loosen the card, but do not bend the card sideways.
6 While holding the retention cover open, press the new card into the expansion slot.
You can slightly seesaw the card end-to-end to help insert the card, but do not bend
the card sideways.
7 Connect any cables to the PCI expansion card following the instructions in the card’s
documentation.
8 Follow the instructions in “Closing the server case” on page 31.
9 See the PCI expansion card’s documentation for software installation instructions.
Caution Do not touch the contacts on the bottom part of the PCI
expansion card. Touching the contacts can cause
electrostatic damage to the card.