53
www.gateway.com
13 Lock the system board into place with the thumbscrew.
14 Install the memory, processor, and heat sink, then reconnect the heat sink cooling
fan to the system board.
15 Connect the power and data cables.
16 Install the expansion cards. For more information, see “Installing a PCI expansion
card” on page 43.
17 Follow the instructions in “Closing the server case” on page 31.
18 Turn on your server.
19 Press F2 when the Gateway logo screen appears during startup. The BIOS Setup utility
opens.
20 Check BIOS settings to make sure that they detect the server’s new hardware, then
save your changes (if any) and close the BIOS Setup utility.
21 If your server does not start after installing the new system board, contact Technical
Support. For more information, see “Getting Help” on page 6.