Filter
Top Products
28
www.gateway.com
Replacing Gateway M275 Components
Replacing memory under the keyboard
Tools you need to complete this task:
Screws removed during this task:
To replace memory modules:
1 Complete the steps in “Preparing the convertible tablet PC” on page 6.
2 Remove the two keyboard screws marked with a K. For more information, see Step 2
on page 21.
3 Turn the convertible tablet PC over so the top is facing up.
4 Remove the keyboard cover by following the instructions in “Replacing the keyboard
cover” on page 18.
5 Open the keyboard compartment by following the instructions in “Replacing the
keyboard” on page 20.
Important Use only memory modules designed for the Gateway M275.
Tips & Tricks You do not need to disconnect the keyboard from the system board.
Flat-blade driver Scribe or non-marring tool
- OR -
Phillips #0 screwdriver
4 chrome 2.5 × 2.5 mm
(keyboard - top)
2 chrome 2.5 × 6 mm
(keyboard - bottom)