Filter
Top Products
NETCOMM GATEWAY™ SERIES – NB304N – ADSL2+ Wireless N300 Modem Router
24
NetComm NB304N – ADSL2+ Wireless N300 Modem
YML304X
www.netcomm.com.au
LAN
The LAN window allows you to modify the settings for your local area network (LAN).
The following options are available to configure:
PARAMETER
DEFINITION
IP Address
Enter the IP Address to use for the NB304N
Subnet Mask
Enter the subnet mask
Enable IGMP Snooping
Enable IGMP Snooping and select the IGMP Snooping mode to use
Enable LAN side Firewall
Enable the LAN side firewall to restrict traffic between LAN hosts
Enable DHCP Server
Select to enable or disable the DHCP server and enter the start and end address for the DHCP IP Address
pool.
Configure the second IP Address
This option enables you to set a secondary IP Address for the NB304N
You can also reserve DHCP Addresses for specific hosts as shown below:
To set a DHCP reservation, enter the MAC Address of the chosen host and IP to use and then click Apply/Save.
The NB304N enables you to set the DHCP options which are provided to hosts attempting to connect to the DHCP server.
These options should not normally need to be set or changed.
Click Apply/Save to save the new LAN configuration settings.
IPv6 Autoconfig