Filter
Top Products
NETCOMM GATEWAY™ SERIES – NB304N – ADSL2+ Wireless N300 Modem Router
34
NetComm NB304N – ADSL2+ Wireless N300 Modem
YML304X
www.netcomm.com.au
Routing
Default Gateway
The router will accept the first received Default Gateway assignment from one of the PPPoA, PPPoE or DHCP enabled PVC(s).
Alternatively, you can manually select which service you would like to use as a default gateway.
Select from the list of configured WAN Services as displayed below.
After selecting the applicable WAN Service interface, click Apply/Save to save the new default gateway settings.
Static Route
Use this if your LAN consists of multiple subnets and you want to manually define the path to transmit data on.
To delete a static route, click the Remove checkbox next to the selected static route and click Remove.
To create a new Static Route, click Add. The Routing-Static Route Add page will shows up.
Enter the following parameters to enter a new Static Route:
PARAMETER
DEFINITION
IP Version
Select the IP Version to apply the static route to.
Destination IP Address/Prefix length
Enter the destination IP Address / IPv6 prefix length to apply the static route to.
Interface
Select the interface to apply the static route to.
Gateway IP Address
If you wish to use a specific gateway to reach the destination network, enter the IP address of the gateway.
Metric
Enter the metric (traffic priority/weighting) to be applied to the static route.
Click Save/Apply to save the new static route entry.