Filter
Top Products
Safety and Warranty Information Falcon 36 Laminator Service Manual
GBC Pro-Tech 1997 October
1-4
WARNING
Connect the laminator only to the type of
power source indicated on the label on the
back of the laminator. You can be severely
shocked, electrocuted or cause a fire. If you
are not sure of the type of power available
consult the dealer or local power company.
WARNING
Do not attempt to defeat the grounding
feature of the ground plug on the laminator.
You can be severely shocked, electrocuted or
cause a fire. The three prong plug fits only
into a grounding-type power outlet. If you
are unable to insert the plug into the existing
outlet, contact a qualified electrician to
replace the obsolete outlet.
WARNING
Do not use an extension cord on this
laminator. You can be severely shocked,
electrocuted or cause a fire. If you need a
longer cable contact a qualified electrician.
WARNING
Do not operate the laminator if the power
cord is damaged or frayed. You can be
severely shocked, electrocuted or cause a fire.
Contact a qualified electrician to replace the
cord.
WARNING
Do not allow anything to rest on the power
cord. Do not locate the cord where people
can walk on it. You or others can be severely
shocked, electrocuted or cause a fire.
WARNING
Do not attempt to plug any device into the
vacuum table outlet that does not require
240V. You can be severely shocked,
electrocuted or cause a fire.
WARNING
Never insert objects of any kind through any
of the slots on the laminator. You can touch
dangerous voltage points or short out parts.
You can be severely shocked, electrocuted or
cause a fire.
ALWAYS USE GOOD SAFETY PRACTICES
WHEN OPERATING OR SERVICING THE
LAMINATOR AND KNOW HOW TO REACT
QUICKLY IN AN EMERGENCY.
&DXWLRQ:DUQLQJ/DEHO/RFDWLRQV
Posted at various locations on your Falcon 36
Laminator are important safety labels. PAY
CAREFUL ATTENTION TO THESE LABELS AT
ALL TIMES! Figure 1-2 shows the location of each
of these labels.