Filter
Top Products
Safety
F-36 PRO Laminator Operation Manual
1-4
© GBC Pro-Tech 1999 January
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
ALWAYS USE GOOD SAFETY PRACTICES
WHEN OPERATING OR SERVICING THE LAMI-
NATOR AND KNOW HOW TO REACT QUICKLY
IN AN EMERGENCY.
)&$**
Posted at various locations on your F-36 PRO Lamina-
tor are important safety labels. PAY CAREFUL
ATTENTION TO THESE LABELS AT ALL TIMES!
Figure 1-2 shows the location of each of these labels.
Connect the laminator only to the type of power
source indicated on the label on the back of the
laminator. You can be severely shocked,
electrocuted or cause a fire. If you are not sure of
the type of power available consult the dealer or
local power company.
Do not attempt to defeat the grounding feature of
the ground plug on the laminator. You can be
severely shocked, electrocuted or cause a fire.
The three prong plug fits only into a grounding-
type power outlet. If you are unable to insert the
plug into the existing outlet, contact a qualified
electrician to replace the obsolete outlet.
Do not use an extension cord on this laminator.
You can be severely shocked, electrocuted or
cause a fire. If you need a longer cable contact a
qualified electrician.
Do not operate the laminator if the power cord is
damaged or frayed. You can be severely shocked,
electrocuted or cause a fire. Contact a qualified
electrician to replace the cord.
Do not allow anything to rest on the power cord.
Do not locate the cord where people can walk on
it. You or others can be severely shocked,
electrocuted or cause a fire.
Do not attempt to plug any device into the
vacuum table outlet that does not require 240V.
You can be severely shocked, electrocuted or
cause a fire.
Never insert objects of any kind through any of
the slots on the laminator. You can touch
dangerous voltage points or short out parts. You
can be severely shocked, electrocuted or cause a
fire.