Filter
Top Products
CHAPTER 17: MISCELLANEOUS COMMANDS MISCELLANEOUS COMMANDS
MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 17–5
17.1.3 Configuring Alarm Relays with EnerVista Secure Web Management Software
To customize the alarm relays,
Z Select the Configuration > Alarms menu item.
Each alarm can be enabled or disabled form the screen shown above. All alarms can be
enabled or disabled using the Alarm Status drop down menu. Relay closure times can be
set using the drop down menu.
Z After changing the Alarm settings, save the configuration using the
save icon ( ),
Alarm relays (continued)
ML2400(alarm)##
show alarm
Alarm Events Configuration
--------------------------
Alarm Status: DISABLED
Relay Closure Time Period: 5 Seconds
EventId Description Mode
------------------------------------------
1 S-RING OPEN NOT ENABLED
2 Cold Start MOMENTARY
3 Warm Start NOT ENABLED
4 Link Up MOMENTARY
5 Link Down NOT ENABLED
6 Authentication Failure MOMENTARY
7 RMON Raising Alarm NOT ENABLED
8 RMON Falling Alarm MOMENTARY
9 Intruder Alarm MOMENTARY
10 Link Loss Learn Triggered MOMENTARY
11 Broadcast Storm Detected MOMENTARY
12 STP/RSTP Reconfigured MOMENTARY
ML2400(alarm)## exit
ML2400#