GE ML2400 Switch User Manual


 
19–2 MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
APPENDIX CHAPTER 19: APPENDIX
Table 19–3: Updates for Manual Revision AA
Section Description
General Manual revised to AA
General Firmware release revised to 2.0.x
1.2.1 Order Code table revised
1.3.3 Added Type Tests section
5.5 IPv6 section added
5.4.2, 5.4.3, 5,4,4 Improved Configuration sections (3) added
Table 4-2 Corrections to table
Table 18-1 Add one new RAW to table - address 0716
Table 19–4: Updates for Manual Revision A9
Section Description
1.2.1 Changes to reflect addition of three new modules
General Manual revised to A9
Table 19–5: Updates for Manual Revision A7
Section Description
1.2.1 Change power supply ranges in Order Codes section
1.3.1 Description of Power Input Ranges in Input Voltage and Input
Current sections
1.3.1 Add short-term temperature duration (-40 to 85 degC for 16 hours)
1.3.2 Ambient Temperature Standard from IEC 60068 to IEC60068-2-1
and IEC60068-2-2
1.3.4 Add UL information: Ul listed/recognized; Change to CE Standard
EN50082-1 and remove EN55024:1998
3.3.1 Table-top/shelf-mounted model name is ML2400-AC
3.4.1 Add filter ground symbol where "filter ground" text appears
3.4.4 Revised picture
3.4.2 Add note #6 (For AC and HI powered units...) to UL Requirements
section
12.1 Remove Link Loss Learn section
General Firmware Revision updated to 1.7.x
General Manual revised to A7