Filter
Top Products
Installation
Installation
Overview
NOTE: Refer to
this manual first, then look in your system manual for information specific to your system
(the Informe
r, for example, or the ProControl 1KE). ProMix 2KS and ProMix 3KS Users: Please refer to
Manual 31338
6.
The Advanced Web Interface (AWI) is an accessory that works with many Graco devices and gateways. The
AWI allows communication with a personal computer (PC) over an ethernet. With the AWI, users can view and
change system setup parameters and create reports from a remote PC. This manual contains installation and
setup information common to all devices. It includes sections on how to configure your computer, initialize the
system, configure the main system settings, and set up your network.
NOTE: Screen views in this manual are shown using Microsoft Windows 7.
Location
TheAWImodulemaybeinstalledinalocalnetwork
of Graco devices, such as a network of ProControl
1KEs. It also may be installed in a Local Area
Network (LAN).
Do not install equipment approved only for
non-hazardous location in a hazardous area.
Install the AWI near your system’s control module,
in a non-hazardous area.
Mounting
1. See Dimensions, page 27.
2. Ensure that the wall and mounting hardware
are strong enough to support the weight of the
equipment, fluid, hoses, and stress caused
during operation.
3. Using the equipment as a template, mark the
mounting holes on the wall at a convenient height
for the operator and so equipment is easily
accessible for maintenance.
4. Drill mounting holes in the wall. Install anchors
as needed.
5. Bolt equipment securely.
332459A 5