Filter
Top Products
Installation
8 313212A
Connect the Cable to the
RoboMix Control Board
1. See the ProMix 2KS Repair-Parts manual. Open the
RoboMix to access the control board.
2. Connect the 10 position connector (24) to J1 on the
control board. See F
IG. 9.
3. Connect the 6 position connector (25) to J8 on the
control board. See F
IG. 10
NOTICE
To avoid damaging circuit board when servicing, wear
grounding strap on wrist and ground appropriately.
F
IG. 9: RoboMix Control Board J1 Connections
F
IG. 10: RoboMix Control Board J8 Connections
J1 Pins 1-4, 7-10
(10 position
Connector 24)
J8 Pins 1-4
(6 position Connector 25)