Filter
Top Products
Setup
313855H 27
Quick Cycle Screen Setup
The Quick Cycle screen setup is used to setup a Trou-
bleshooting profile.
1. Use the Arrow keys to move the cursor over the
CYCLES field.
2. Press ENTER.
3. Use the UP/DOWN arrows to move up and down
through the numbers 0-9 until the first number you
want in the CYCLES field is displayed.
4. Use the RIGHT arrow to move the cursor to the next
field. Repeat step 3.
NOTE: The maximum number of Cycles you can setup
in this field is 99.
5. Use the Arrow keys to move the cursor over the
TIME ON field.
6. Press ENTER.
NOTE: Time On and Time Off in QUICK CYCLE mode
only, are displayed in Seconds.
7. Use the UP/DOWN arrows to move up and down
through the numbers 0-9 until the first number you
want to use in the TIME ON field is displayed in the
field.
8. Use the RIGHT arrow to move the cursor to the next
field. Repeat step 7.
9. Press ENTER.
10. Use the Arrow keys to move the cursor over the
TIME ON field.
11. Press ENTER.
12. Repeat steps 7 - 9 for the TIME OFF field.
13. Use the Arrow keys to move the cursor over the
pull-down menu.
14. Select ON.
15. The Quick Cycle begins.
NOTE:
• The maximum Time Off and Time On is 99 seconds.
• When complete, the system returns to the Run
Mode. It does not come back to the Quick Cycle
Setup Screen.
LOW LEVEL FILTERING Setup
1. Use the UP/DOWN Arrow keys to move the cursor
over LL FILTERING.
2. Press ENTER to display the LL FILTERING setup
screen.
F
IG. 50
FIG. 51