Filter
Top Products
OPERATION ________________________
10
Operation
TV controls
Programme selection
You can use the controls on either the TV or remote control to select
channels.
1. Press the CHST buttons on the TV or remote control or press a
NUMBER button to select a programme.
Note:
There are 200 available channels on the TV (0-199), but the two and
three digit channels can only be selected by using the DOUBLE DIGIT
button.
1. Press the DOUBLE DIGIT button repeatedly to bring up the three
different channel selection modes. The icon will appear in the top
left corner of the screen:
- Select one digit channels only (0 - 9).
- - Select any two digit channels (00 - 99).
1 - - Select any three digit channels are over 100 (100 - 199).
Volume
1. Press the VOLWX button on the TV or remote control. A sound
level bar will appear on the screen.
Mute
1. To mute the sound, press the MUTE button on the remote control.
The mute symbol will appear on the screen in the top left corner
of the screen.
2. Press the MUTE button again to restore the sound. The mute
symbol will disappear.
Note:
Pressing any of the VOLUME buttons will also restore the sound.
Return
1. Press the RETURN button to swap between the programme you
are watching and the last selected programme. i.e. If you were
watching Program 1 and change to Program 3.
2. Press the RETURN button to go back to Program 1.
3. Press the RETURN button again to return to Program 3.
GUVLCD1500.book Page 10 Thursday, December 1, 2005 10:03 AM