Filter
Top Products
OPERATION ________________________
18
Using the TV as a monitor
Initial set PC mode
1. Switch on the TV by pressing the ON/OFF button on the top of
the TV or on the remote control.
2. Select the PC - RGB Input detailed on page 15.
The PC screen is automatically set. When a CD-Title runs, the
music is output from speakers.
Adjusting the display settings
The display settings can be adjusted to centre your viewing screen.
1. Press the MENU button until the PC MENU appears.
2. Use the CHST button to select one of the options listed below:
3. Use the VOLWX button to adjust any of the settings.
4. When finished, press the ESC button repeatedly until the menus
disappear.
Brightness
Allows you to increase and decrease the brightness of the display.
Contrast
Allows you to increase and decrease the contrast of the display.
Color Setting (Temperature)
Select one of the following settings:
• User Define - Lets you adjust the R.G.B. gain levels.
• 6500k - Set the colour temperature to 6500k
• 9300k - Set the colour temperature to 9300k
Auto Config
Automatically adjusts the available options for the best viewing
configuration.
H.Position
Adjust the horizontal position of the picture.
V. Po si ti o n
Adjust the vertical position of the picture.
Phase
Adjust the horizontal sync phase of the signal.
Clock
Adjust the TFT-LCD refresh rate to match the Video Input source
GUVLCD1500.book Page 18 Thursday, December 1, 2005 10:03 AM