Filter
Top Products
12
Gyration RF Receiver
Learn Button
Pressing the LEARN button for 2 seconds puts the receiver into “Learn Mode”
allowing you to synchronize one or more devices with the receiver. After
devices have been synchronized, pressing the LEARN button again for 2
seconds takes the receiver out of Learn mode. If the receiver is not manually
taken out of Learn Mode, it will automatically return to Normal Mode after
five minutes.
Status LED
The Status LED displays useful information about modes of operation and the
connection between receiver and transmitter(s).
T The Status LED remains off when the receiver is operating in
“Normal Mode” and no devices are transmitting.