Filter
Top Products
Using the CD-ROM to Install the Software 4-5
Using the CD-
ROM to Install
4
5. When prompted, print a test page to verify printer setup.
If the test page successfully prints, then you have completed
printer setup on this computer system. (If this system was a server,
see “Client-Server Networks” below.)
If the test page fails to print, perform the troubleshooting tasks
displayed by the wizard. Click Help for more information.
In addition, you can select Networking Help from the CD-ROM
installation utility’s main screen.
For detailed troubleshooting information, read the
“Troubleshooting” chapter 7.
Client-Server Networks
After you have set up the printer on the server, you will need to set
up your network clients to access the printer through the server.
The procedures depend on the available utilities for your particular
clients and network operating system.
For example, if the printer was installed and shared on a Microsoft
server, each Windows client can use Add Printer or Network
Neighborhood utilities to access the printer.
For more information, refer to the documentation and help supplied
with your network operating system.
Peer-to-Peer Windows Networks
After you have set up the printer on the first system, repeat the entire
procedure on pages 4-3 through 4-6 on each additional system you want
to print directly to the network printer.
0Book-asF01.book Page 5 Tuesday, August 14, 2001 2:06 PM