Filter
Top Products
8-2 HP Jetdirect Configuration Page Messages
Table 8.1 Novell NetWare Configuration Messages (1 of 2)
Message Description
IPX/SPX RETRANS: Number of retransmissions necessary because a
remote node did not acknowledge receipt of a frame
sent to it. Excessive retransmissions may degrade
performance, cause 40 ERRORS, or indicate
developing network hardware or congestion problems.
IPX/SPX STATUS:
DISABLED
READY
INITIALIZING
NOT IN USE
Indicates the current IPX/SPX protocol status.
16 Not Configured indicates the print server is ready
to be configured for Novell
DISABLED indicates that IPX/SPX was manually
disabled.
READY indicates the HP Jetdirect print server is
awaiting data.
INITIALIZING indicates that the print server is
registering the node address or name.
Code is in the middle of a download.
MODE:
QUEUE SERVER
REMOTE PRINTER
The mode used by the print server.
QUEUE SERVER indicates that the print server
receives data directly from the queue; REMOTE
PRINTER, with the printer number following it, indicates
that the print server emulates a Novell remote printer.
If the printer is not configured, this field displays
QUEUE SERVER.
0Book-asF01.book Page 2 Tuesday, August 14, 2001 2:06 PM