Filter
Top Products
Starting Out with Your OmniBook
Using OmniBook Accessories
1-21
To install the floppy disk drive
1. If necessary, remove the current accessory module from the OmniBook.
2. Slide the floppy disk drive into the OmniBook until it clicks into place.
–or–
Connect the floppy disk drive to the OmniBook externally by pulling out the
floppy disk drive cable and connecting it to the parallel port on the left side of
the OmniBook.
Important
The external floppy disk drive works only with the OmniBook’s parallel port. It does
not work with the parallel port on the docking system or port replicator.
Parallel port