Filter
Top Products
4.5.5 INITIAL Menu
The INITIAL menu (Table 4–12) combines the macro, paint, and paper size
features. You can save settings from this menu only in NVRAM. To activate
the settings, perform a reset after changing them.
Table 4–12: INITIAL Menu Features and Values
Feature Values Description
macro 000
1
–099 Assigns the user preference set, device identification
answer, and initialization message (see Section 4.5.5.1).
paint Partial
1
Reserves no memory for bitmap pages. Memory is
allocated dynamically.
Full Directs the printer to allocate memory space for one full
bitmap page. The Full setting eliminates complex errors
but may slow the printer down if not all pages require a
full bitmap.
NOTE: A4 and letter-size require at least 1 MB of
optional RAM. Legal-size requires 2 MB of optional RAM.
Dual Directs the printer to allocate memory space for two full
bitmap pages. The Dual setting allows you to print at a
more efficient speed for documents that require full page
bitmaps for all pages. It also allows you to print duplex
pages, for which each side requires a full page bitmap.
The Dual setting requires more memory space that must
be shared with fonts.
NOTE: A4 and letter-size require at least 2 MB pf
optional RAM. Legal-size requires 3 MB of optional RAM.
paper Letter
2
Specifies letter-size (8 ½ in. x 11 in.) paper for manual
feed operation.
A4 Specifies A4-size (297 mm x 210 mm) paper for manual
feed operation.
1
Factory default setting.
2
Factory default setting for North America. Other countries use A4 as the default setting.
4–24 Operator’s Guide