Filter
Top Products
Table 4–6 (Cont.): Changing and Saving Values
Operation Display Reads
6. Press until the
value equals -10.0.
NOTE: The value decreases
in steps of 0.5.
offsetX -1
0.0
7. Press
Enter
to enter
the new value.
offsetX =-10.0 (momentarily)
offsetX offsetY
8. Press once to scroll
the display to the offsetY feature.
offsetY autoNL o
9. Press
Enter
to select
the offsetY feature.
offsetY =+0.0
10. Press until the
value equals -10.0.
NOTE: The value decreases
in steps of 0.5.
offsetX -1
0.0
11. Press
Enter
to enter
the new value.
offsetY =-10.0 (momentarily)
offsetY autoNL o
12. Press to return
to the menu selections.
LAYOUT COPY/OVER
13. Press three
times to reach the
NVRAM SAVE menu.
SAVE->NVRAM LOAD
14. Press
Enter
to save
the offset values in
NVRAM.
OK (momentarily)
SAVE–>NVRAM LOAD
4–12 Operator’s Guide