Filter
Top Products
3. Press
On Line
to place the printer off line.
— The On Line indicator shuts off.
4. Press
Feeder Select
until the display reads FEEDER = Manual.
— After about 3 seconds the display will read 00 READY.
— The manual feed mode selection is now stored in operating memory.
5. Press
On Line
to place the printer back on line.
— The On Line indicator lights.
6. Send data from the host computer to the printer.
— The Data indicator lights and the display reads PF FEED xxx
(where xxx = paper size).
7. Adjust the manual feed guides to accept the width of the envelope.
MLO-005134 (Figure 2-28; 16 picas)
Operating Information 2–29