Filter
Top Products
IP Routing Features
Overview of IP Routing
IP Interface Parameters for Routing Switches
Table 3-2 lists the interface-level IP parameters for routing switches.
Table 3-2. IP Interface Parameters – Routing Switches
Parameter Description Default See page
IP address A Layer 3 network interface address; separate IP
addresses on individual VLAN interfaces.
None configured *
Metric A numeric cost the router adds to RIP routes learned
on the interface. This parameter applies only to RIP
routes.
1 (one) 3-29
ICMP Router
Discovery
Protocol (IRDP)
Locally overrides the global IRDP settings. See table 3-
1 on page 3-8 for global IRDP information.
Disabled 3-41
IP helper address The IP address of a UDP application server (such as a
BootP or DHCP server) or a directed broadcast
address. IP helper addresses allow the routing switch
to forward requests for certain UDP applications from
a client on one subnet to a server on another subnet.
None configured 3-45
*
Refer to the chapter titled “Configuring IP Addressing” in the Management and Configuration Guide for your switch.
3-12