Filter
Top Products
Mathematical Calculations12
Chain Mode
Calculations in Chain mode are interpreted in the order in which they are entered. For
example, entering the following numbers and operations as written from left to right,
1+2*3=, returns 9. See Figure 2.
Figure 2 Calculation in Chain Mode
NOTE: if you press an operator key, +-*/, after =, the calculation is
continued using the currently displayed value.
In Chain mode, if you wish to override the left to right order of entry, use parentheses
(D to prioritize operations.
For example, to calculate 1 + (2 x 3), you may enter the problem as written from left to right,
with parentheses to prioritize the multiplication operation. See Table 2-1 below.
Algebraic Mode
To set the calculator in Algebraic mode, refer to the section titled, The Mode Menu: Setting
Preferences in Chapter 1.
In Algebraic mode, multiplication and division have a higher priority than addition and
subtraction. For example, in Algebraic mode, pressing
1+2*3=
returns a result of 7.00 . In Chain mode, the same key presses return a result of 9.00.
In Algebraic mode, operations between two numbers have the following priority:
• Highest priority: the power function ( y
x
)
• Second priority: combinations and permutations
• Third priority: multiplication and division
• Lowest priority: addition and subtraction
Table 2-1 Simple Arithmetic Calculations in Chain Mode
Keys Display Description
1+
(2*3D
Sets operational priority, inputs numbers,
and multiplies 2 and 3.
=
Adds 1 to 6 and returns 7.0 0 on the bottom
line as the final result.