Filter
Top Products
2-33
Installation and Configuration
Selecting Tone or Pulse Dialing
The HP OfficeJet Series 300 is factory set for touchtone (Tone) dialing telephone systems. If used with a rotary (Pulse)
dialing telephone system, the HP OfficeJet Series 300 will need to be set for Pulse dialing. This procedure can be used
to set for either dialing system as required. The dialing mode in an HP OfficeJet Series 300 is set during installation of
the software, but can be changed using the front panel or using the HP OfficeJet Series 300 Manager software and
selecting Tone or Pulse in the Dialing Mode menu of the Send Fax Setup dialog box as described in the HP OfficeJet
Series 330 or 350 User’s Guide. To select the dialing mode from the front panel use the following instructions:
2. Press Right Arrow multiple times to move
to “Fax Settings.”
3. Press Enter/Save to select “Fax Settings.”
Enter/Save
Enter/Save
9. Press Enter/Save to select “Pulse.” An
asterisk (*) denotes the user’s new selec-
tion.
MENU
Fax Settings
FAX SETTINGS
Speed Dial Setup
1. Press the Menu button to display the menu.
MENU
Time/Date, Header
Menu
4. Press Right Arrow multiple times to move
to “Phone Setup.”
FAX SETTINGS
Phone Setup
5. Press Enter/Save to select “Phone Setup.”
PHONE SETUP
Rings to Answer
Enter/Save
7. Press Enter/Save to select “Dialing Mode.”
The factory setting, Tone, is displayed.
DIALING MODE
Tone *
Enter/Save
8. Press Right Arrow to move to “Pulse.”
6. Press Right Arrow multiple times to move
to “Dialing Mode.”
PHONE SETUP
Dialing Mode
Enter/Save
10.Press Enter/Save again to return to the
Ready display.
Ready Auto
Nov-10-94 12:41 PM
DIALING MODE
Pulse
DIALING MODE
Pulse *
Do this: Using these buttons: For this display: