Filter
Top Products
Control panel message Description Recommended action
INSTALL SUPPLIES
For status press
At least one supply item is missing or is
not correctly seated in the printer and
another supply item is missing,
incorrectly placed, out, or low. Insert the
supply item or make sure the installed
supply item is fully seated.
Press and then press for help.
or
See
Supply replacement guidelines for
more information.
INSTALL TRANSFER
UNIT
alternates with
For help press
The transfer unit is either not installed or
not correctly installed in the printer.
Press for help.
or
See
Replacing the transfer kit for more
information.
LOAD TRAY X
<TYPE> <SIZE>
alternates with
To use another
tray press
Tray X is either empty or configured for
a type and size other than what is
specified in the job.
Press for help.
or
Press
to print from another tray. See
Configuring trays for more information.
LOAD TRAY X
<TYPE> <SIZE>
alternates with
For help press
Tray X is either empty or configured for
a type and size other than specified in
the job. No other tray is available.
Press for help.
or
See
Configuring trays for more
information.
Loading
program X
alternates with
DO NOT POWER OFF
Programs and fonts can be stored on
the printer file system and are loaded
into RAM when the printer is turned on.
The number X specifies a sequence
number indicating the current program
being loaded.
For the HP Color LaserJet 3700 series
printer only.
No action necessary.
MANUALLY FEED
OUTPUT STACK
alternates with
Then press to
print second sides
The first side of a manual 2-sided print
job has been printed and the printer is
waiting for the output stack to be
inserted for the second side to be
printed.
Take the output stack out of the output
bin and reinsert it in Tray 1 to print the
second side of the 2-sided print job. See
Manual 2-sided printing for more
information.
If no paper is in the manual feed
tray:
MANUALLY FEED
<TYPE> <SIZE>
alternates with
To continue press
Paper is in Tray 1, but a job sent
requires a specific paper type and size
that is not currently available.
Press to print from the tray.
or
Press
for help.
or
See
Configuring trays for more
information.
MANUALLY FEED
<TYPE> <SIZE>
alternates with
For help press
Tray 1 is empty and no other tray is
available.
Press for help.
or
See
Configuring trays for more
information.
ENWW Control panel messages
137