Filter
Top Products
11. Press to select the desired link speed.
12.
Press M
ENU
to return to the Ready state.
Disabling network protocols (optional)
By factory default, all supported network protocols are enabled. Disabling unused protocols
has the following benefits:
● decreases printer-generated network traffic
● prevents unauthorized users from printing to the printer
● provides only pertinent information on the configuration page
● allows the printer control panel to display protocol-specific error and warning messages
Note
TCP/IP configuration should not be disabled on the HP Color LaserJet 3500 printer. If you
disable TCP/IP, you will lose the connection to the printer's embedded Web server page.
To disable IPX/SPX
Note
Do not disable this protocol if Windows 95/98, Windows NT, Me, 2000, and XP systems will
be printing to the printer using IPX/SPX.
1.
Press M
ENU
to enter the MENUS.
2.
Press
to highlight Configure Device.
3.
Press
to select Configure Device.
4.
Press
to highlight I/O.
5.
Press
to select I/O.
6.
Press
to highlight EIO 1.
7.
Press
to select EIO 1.
8.
Press
to highlight IPX/SPX.
9.
Press
to select IPX/SPX.
10.
Press
to select ENABLE.
11.
Press
to highlight OFF.
12.
Press
to select OFF. The control panel displays a message that the setting has been
saved and displays an option to re-enable IPX/SPX.
13.
Press M
ENU
to return to the Ready state.
To disable AppleTalk
1.
Press M
ENU
to enter the MENUS.
2.
Press
to highlight Configure Device.
3.
Press
to select Configure Device.
4.
Press
to highlight I/O.
5.
Press
to select I/O.
6.
Press
to highlight EIO 1.
ENWW Network configuration
57