Filter
Top Products
hp scanjet 2400, 3670, 3690, and 3970 digital flatbed scanners
chapter 3
15
scan negatives
To scan 35 mm negatives use the negative strip holder that is part of the built-in
TMA.
1 Open the scanner lid.
2 Slide a negative strip into the negative strip holder so that the shiny side
faces you.
Note: Negatives are easily damaged. Touch them only on their edges.
3 Close the scanner lid.
Note: Do not click S
CAN until the negatives are loaded and the lid is
closed.
4 Press the SCAN button ( ).
A dialog box appears asking what you are scanning.
5 Select Picture.
6 Click Scan.
7 Select Negatives from a Transparent Materials Adapter (TMA).
8 Click Scan.
The scanner performs a preview scan, and the preview image appears.
9 Select a final scan area. Click and drag a border around the area you
want for a final scan (final scan area).
10 Make any adjustments you want to the preview image. When the image
adjustments are complete, click Accept.
insert a negative strip
select a final scan area
Final scan area