Filter
Top Products
C-6
TapeAlert Messages
TapeAlert Messages and Descriptions
Table C-2 TapeAlert Library Error Messages
31 Hardware B C The tape drive has a
hardware fault:
1. Turn the tape drive off
and then on again.
2. Restart the operation.
3. If the problem persists,
call the tape drive
supplier helpline.
Check the tape drive users
manual for device specific
instructions on turning the
device power on and off.
Power off the tape drive
and attempt the operation
again.
32 Interface W The tape drive has a
problem with the host
interface:
1. Check the cables and
cable connections.
2. Restart the operation.
If the problem persists, call
the tape drive supplier
helpline.
34 Download
Fail
W The firmware has failed
because you have tried to
use the incorrect firmware
for this tape drive. Obtain
the correct firmware and
try again.
Call the tape drive supplier
helpline for more
information.
No. Flag Type Displayed Message
Additional Action
Information