Filter
Top Products
3-22
Operating the Library
Viewing Cartridge Bar Code Labels
Viewing Cartridge Bar Code Labels
Bar code label information can be viewed for each tape cartridge in the library using
the control panel. Bar code information displays sequentially by storage slot
number.
To view bar code information:
1. Verify that the drive status displays (if not, press
CANCEL until it does).
2. Press
NEXT until VIEW BAR CODES * displays, then press ENTER.
###### SLOT # displays. (“######” represents the bar code information, and
“#” represents the first storage slot that contains a bar coded tape cartridge.)
NOTE If there are no bar coded tape cartridges in the library, LIBRARY EMPTY displays
briefly, then VIEW BAR CODES * displays. Press
CANCEL to return to the drive
status indicators (“ready” state).
3. Press
NEXT or PREV to scroll through the storage slot locations that contain bar
coded tape cartridges.
4. Press
CANCEL twice to return to the drive status indicators (“ready” state).