HP (Hewlett-Packard) 4720S Laptop User Manual


 
Select To do this
Port Options NOTE: All port options are enabled by default.
Enable/disable the serial port (select models only).
Enable/disable the parallel port (select models only).
Enable/disable the flash media reader.
Enable/disable the USB port.
CAUTION: Disabling the USB port also disables
MultiBay devices and ExpressCard devices on the
advanced port replicator.
Enable/disable the 1394 port (select models only).
Enable/disable the ExpressCard slot (select models only).
Enable/disable the eSATA port (select models only).
AMT Options (select models only) NOTE: All AMT options are disabled by default.
Enable/disable firmware verbosity.
Enable/disable AMT setup prompt (Ctrl-P)
Enable/disable USB key provisioning support.
Enable/disable unconfigure AMT on next boot.
Select terminal emulation mode. Options include the
following:
ANSI (default setting)
VT100
Enable/disable firmware progress event support.
Enable/disable initiate Intel CIRA.
Set Security Level Change, view, or hide security levels for all BIOS menu items.
Restore Security Defaults Restore the default security settings.
Computer Setup
131