Filter
Top Products
HP SureStore DAT
Installation Guide
1-10
Step 2: Set the Configuration Switches
(UNIX Systems Only)
1 Check the “UNIX Configuration Instructions” in the electronic User’s
Guide on the HP SureStore Tape CD-ROM for specific advice for your
operating system. You will need web browser software to access the
electronic User’s Guide. See page 1-22 for more information about using the
HP SureStore Tape CD-ROM.
The following table summarizes the typical switch settings for different
types of computer, but further details are provided in the electronic User’s
Guide.
2 If your UNIX configuration requires it, change the configuration switches
located on the underside of the drive from the default settings shown in
figure 1.3.
Figure 1.3 Configuration switches (shown in default positions)
Switch Number
System Type 12345678
Default and most PC systems
On On Off On On On On On
DEC systems On On Off On On On On Off
HP systems (Series 700)
On On Off On On On On On
IBM RS/6000 systems On On Off On On Off Off On
SCO/PC UNIX systems On On Off On On On On On
Silicon Graphics systems
On On Off On On Off Off On
Sun systems On On On On On Off Off On
= ON
= OFF
Dat-int.bk Page 10 Wednesday, May 26, 1999 10:46 AM