Filter
Top Products
75
3 System Board (P/Ns D3657-63001 and D3661-63001)
Devices on the PCI Bus
Devices on the PCI Bus
The PL/PCI bridge is implemented within the Intel SB82437FX-66 chip (see
page 63). It is responsible for transferring data between the Processor-Local
bus and the PCI bus.
As a PCI bus slave, this chip becomes the PL bus master, to generate DRAM
requests on behalf of other PCI bus masters. It supports PCI bus burst
cycles, posted writes to DRAM for PCI burst writes, and read-ahead from
DRAM for PCI burst reads.
As a PCI bus master, this chip provides for programmable PCI bus memory
regions in the memory address map, and supports PCI bus burst cycles for
64-bit and 32-bit misaligned Pentium reads and writes. It provides optional
posting of PCI memory and I/O writes, optional buffering of PCI memory
writes, and optional read-ahead for processor to PCI accesses.
As the PCI bus arbiter, it can handle up to four masters, using a rotating
priority scheme.
The PCI bus handles the following peripheral devices:
• video controller
• IDE controller
• other devices in the PCI accessory slots.
Video Controller
Depending on the model, the PC uses one of the following:
• An integrated 32/64-bit Ultra VGA controller on the PCI bus, with 1 MB of
video memory. Memory can be increased to 2 MB by installing two 512 KB
modules.
• A Matrox MGA Millennium card with 2 MB of video memory that can be
increased to 4 MB or 8 MB. The Matrox MGA Millennium video card is
installed in one of the PCI slots on the backplane. For a full description of
the Matrox MGA Millennium video card, refer to “Matrox MGA Millennium
Video Controller Card” on page 127.