HP (Hewlett-Packard) 5500c Scanner User Manual


 
install the scanner
5
connect the TMA
If your scanner has a transparent materials adapter (TMA), it allows you to scan
35 mm slides or negatives.
1 Disconnect the power cable from the scanner.
2 On the back of the scanner, find the round TMA port:
On the HP Scanjet 4500c and 5550c series scanners, the TMA port is
the second port from the left.
On the HP Scanjet 4570c and 5500c series scanners, the TMA port is
the second port from the right.
3 Holding the TMA cable by its free end, align the connector so the arrow is
on the top side.
4 Gently insert the connector into the TMA port.
5 Reconnect the power cable.
TMA port
P_usermanual.book Page 5 Monday, May 6, 2002 6:26 PM