Filter
Top Products
Installing the Fibre Channel HBA Drivers for Linux
If your system contains Fibre Channel Host Bus Adapters (HBAs), you should ensure that the
most current drivers supported by HP are installed; this is applicable to all releases of Linux
distributions. Fibre Channel HBAs include the following:
A6826A
PCI-X 2-port 2Gbps Fibre Channel
A7538A
PCI-X 1-port 2Gbps Fibre Channel
AB379A
2-port 4Gbps Fibre Channel
AB429A
1-port 4Gbps Fibre Channel
AD167A
1-port 4Gbps Fibre Channel
AD168A
2-port 4Gbps Fibre Channel
AE311A
1-port 4Gbps Fibre Channel
AD300A
2-port 4Gbps Fibre Channel
A8002A
1-port 4Gbps Fibre Channel
A8003A
2-port 4Gbps Fibre Channel
403619-B21
2-port 4Gbps Fibre Channel
List all PCI devices to determine whether your system contains one of these adapters:
# lspci | grep Fibre
80:02.0 Fibre Channel: Emulex Corporation Helios-X LightPulse Fibre Channel Host Adapter (rev 01)
a0:02.0 Fibre Channel: QLogic Corp. QLA2312 Fibre Channel Adapter (rev 03)
a0:02.1 Fibre Channel: QLogic Corp. QLA2312 Fibre Channel Adapter (rev 03)
NOTE: The number of PCI functions displayed for each adapter by lspci is determined by
the number of ports the adapter has. In other words, 2-port adapters have two entries with the
same PCI bus/slot that differ only in function number, as in the previous example.
Output of lspci CommandAdapter Part No.
Fibre Channel Fibre Channel: QLogic Corp. QLA2312 Fibre Channel
Adapter (rev 03)
A6826A
Fibre Channel Fibre Channel: QLogic Corp. QLA2312 Fibre Channel
Adapter (rev 03)
A7538A
Fibre Channel: QLogic Corp. QLA2422 Fibre Channel Adapter (rev 02)
AB379A
Fibre Channel: QLogic Corp. QLA2422 Fibre Channel Adapter (rev 02)
AB429A
Fibre Channel: Emulex Corporation Helios LightPulse Fibre Channel
Host Adapter (rev 01)
AD167A
32 Installing the OS and Updating the Server